Item 9a. If the wastes identified in Item 9b consist of both hazardous and nonhazardous materials, then identify the hazardous materials by entering an "X" in this Item next to the corresponding hazardous material identified in Item 9b. Item 9b. Enter the U. Include technical name s and reportable quantity references, if applicable.
USDOT requires the word waste before or in the shipping name for all hazardous waste. Also, if more than one Emergency Response phone number applies to the various wastes described in either Item 9b or Item 27, enter applicable Emergency Response phone numbers immediately following the shipping descriptions for those Items. Item Containers Number and Type. Enter the number of containers for each waste and the appropriate abbreviation from Table I below for the type of container.
BA - Burlap, cloth, plastic, or paper bags. CF - Fiber or plastic boxes, cartons, cases.
CM - Metal boxes, cartons, cases including roll-offs. CW - Wooden boxes, cartons, cases. CY - Cylinders. DF - Fiberboard or plastic drums, barrels, kegs. DM - Metal drums, barrels, kegs.
DT - Dump trucks. DW - Wooden drums, barrels, kegs. HG - Hopper or gondola cars.
TC - Tank cars. TP - Portable tanks. TT - Cargo tank tank trucks. Total Quantity—Enter, in designated boxes, the total quantity of waste. Round partial units to the nearest whole unit.
Part Standards Applicable to Generators of Hazardous Waste
To the extend practical, report quantities using appropriate units of measure that will allow you to report quantities with precision. Waste quantities entered should be based on actual measurements or reasonably accurate estimates of actual quantities shipped. Container capacities are not acceptable as estimates. K - Kilograms 2. M - Metric tons 1, kilograms 2, pounds. T - Tons 2, pounds. Special Handling Instructions and Additional Information to assure accurate conversion of volumetric units into weight.
The value of 1.
- find free property tax records.
- Best Practices for Waste Oil Management!
- eCFR — Code of Federal Regulations.
- monmouth county new jersey public records.
- 40 CFR § - Definitions. | CFR | US Law | LII / Legal Information Institute.
- terry erwin stork austin texas criminal charges;
Note: Tons, Metric Tons, Cubic Meters, and Cubic Yards should only be reported in connection with very large bulk shipments, such as rail cars, tank trucks, or barges. Waste Codes—Enter up to six Federal and State waste codes to describe each waste stream identified in Item 9b. State waste codes that are not redundant with Federal codes must be entered here, in addition to the Federal waste codes which are most representative of the properties of the waste.
If the receiving TSD facility is not providing a hazardous waste management method code in Item 19 that reflects the ultimate disposal method for the hazardous waste, the generator must provide a State waste code to designate the ultimate disposal method of the waste using one of the following State codes:.
Special Handling Instructions and Additional Information. Generators may enter any special handling or shipment-specific information necessary for the proper management or tracking of the materials under the generator's or other handler's business processes, such as waste profile numbers, container codes, bar codes, or response guide numbers. Generators also may use this space to enter additional descriptive information about their shipped materials, such as chemical names, constituent percentages, physical state, or specific gravity of wastes identified with volume units in Item This space may be used to record limited types of federally required information for which there is no specific space provided on the manifest, including any alternate facility designations; the manifest tracking number of the original manifest for rejected wastes and residues that are re-shipped under a second manifest; and the specification of PCB waste descriptions and PCB out-of-service dates required under 40 CFR The generator must read, sign, and date the waste minimization certification statement.
The date is the date of receipt by transporter.
In signing the waste minimization certification statement, those generators who have not been exempted by statute or regulation from the duty to make a waste minimization certification under section b of RCRA are also certifying that they have complied with the waste minimization requirements.
The Generator's Certification also contains the required attestation that the shipment has been properly prepared and is in proper condition for transportation the shipper's certification. Note: All of the above information except the handwritten signature required in Item 15 may be pre-printed. International Shipments. For export shipments, the primary exporter must check the export box, and enter the point of exit city and state from the United States.
For import shipments, the importer must check the import box and enter the point of entry city and state into the United States. For exports, the transporter must sign and date the manifest to indicate the day the shipment left the United States. Transporters of hazardous waste shipments must deliver a copy of the manifest to the U.enter
Utah Administrative Code
Transporter Acknowledgment of Receipt. Enter the name of the person accepting the waste on behalf of the first transporter. That person must acknowledge acceptance of the waste described on the manifest by signing and entering the date of receipt. Only one signature per transportation company is required. Signatures are not required to track the movement of wastes in and our of transfer facilities, unless there is a change of custody between transporter.
If applicable, enter the name of the person accepting the waste on behalf of the second transporters. Note: Transporters carrying imports, who are acting as importers, may have responsibilities to enter information in the International Shipments Block.
- 11 Common Manifest Errors Noted by California’s Department of Toxic Substances Control!
- texas divorce objection to associate judge.
- free reverse listings for cell phone numbers.
- Best Practices for Waste Oil Management.
- UT Admin Code R Hazardous Waste Generator Requirements. October 1, .
- travelling to jamaica with a criminal record.
Transporters carrying exports may also have responsibilities to enter information in the International Shipments Block. See above instructions for Item Item 18a. Discrepancy Indication Space.
The authorized representative of the designated or alternate facility's owner or operator must note in this space any discrepancies between the waste described on the Manifest and the waste actually received at the facility. Manifest discrepancies are: significant differences as defined by sections For rejected loads and residues section Enter the reason for the rejection or the inability to remove the residue and a description of the waste. Also, reference the manifest tracking number for any additional manifests being used to track the rejected waste or residue shipment on the original manifest.
Indicate the original manifest tracking number in Item 14, the Special Handling Block and Additional Information Block of the additional manifests. Owners or operators of facilities located in unauthorized states i. Owners or operators of facilities located in authorized states i.
For facilities located in New York State, upon discovering a discrepancy, the owner or operator of the facility must attempt to reconcile the discrepancy with the waste generator or transporter e. If the discrepancy is not revolved within 15 days after receiving the waste, the owner or operators must immediately submit a letter to the generator state and the disposer state describing the discrepancy and attempts to reconcile it, and a copy of the manifest or shipping paper at issue.
Item 18b. Enter the name, address, phone number, and EPA Identification Number of the Alternate Facility which the rejecting TSDF has designated, after consulting with the generator, to receive a fully rejected waste shipment.
In the event that a fully rejected shipment is being returned to the generator, the rejecting TSDF may enter the generator's site information in this space. This field is not to be used to forward partially rejected loads or residue waste shipments. Item 18c. Alternate Facility or Generator Signature.
The authorized representative of the alternate facility or the generator in the event of a returned shipment must sign and date this field of the form to acknowledge receipt of the fully rejected wastes or residues identified by the initial TSDF. The Hazardous Waste Report Management Method code is to be entered by the first treatment, storage, or disposal facility TSDF that receives the waste and is the code that best describes the way in which the waste is to be managed when received by the TSDF. Enter the name of the person receiving the waste on behalf of the owner or operator of the facility.
That person must acknowledge receipt or rejection of the waste described on the Manifest by signing and entering the date of receipt or rejection where indicated. Since the facility certification acknowledges receipt of the waste except as noted in the Discrepancy Space in Item 18a, the certification should be signed for both waste receipt and waste rejection, with the rejection being noted and described in the space provided in Item 18a. Fully rejected wastes may be forwarded or returned using Item 18b after consultation with the generator. Enter the name of the person accepting the waste on behalf of the owner or operator of the alternate facility or the original generator in Item 18b.
That person must acknowledge receipt or rejection of the waste described on the Manifest by signing and entering the date they received or rejected the waste in Item 18c. Lands and outdoor activities Topics: activities, parks, property management.